Inertial+ Family

The Inertial+ Navigation System is an extremely price competitive solution for improving measurements from a GPS receiver. Designed as a drop-in component the Inertial+ takes the serial NMEA data from your current GPS receiver, blends it with inertial sensors and outputs the improved data in the same NMEA format. Other input and output formats are supported.




Smooth Position

GPS often jumps because of multipath and changes to the satellite constellation. The Inertial+ measurements are computed from the gyros and accelerometers, which do not jump. GPS is used to update these measurements and prevent them from drifting.


Continuous Position

Even when GPS is not able to make a measurement, the Inertial+ will output from its inertial solution. Using a wheel speed odometer input the drift rate in position can be as low as 5 metres in 2 minutes.



As well as improving position and velocity measurements, the Inertial+ measures Heading, Pitch and Roll. These are important for correcting cameras or laser sensors.


Dual Antenna Option

The Inertial+2 system is designed to use dual-antenna GPS for even greater heading accuracy. Using two GPS receivers, a very accurate and stable heading measurement is possible under low dynamic conditions, such as aircraft flights. Heading accuracy is constant during long flight lines, where inertial systems typically reduce in accuracy.


Save Time

It takes a lot of time to correct poor GPS measurements by hand. Often geo-referenced data is lost because of poor GPS. Hours of time and many geo-referenced images can be saved with an Inertial+.



The Inertial+ system includes three angular rate sensors (gyros), three servo-grade accelerometers and all the required processing in one very compact box. A basic internal GNSS GPS provides accurate time alignment and makes it simpler to use.

Simple configuration software allows the user to change the mounting angle; displace the measurement point to a virtual location; change the GPS receiver type and many more. Once configured the Inertial+ works autonomously and does not require user attention. It can be used by non-skilled operators.

The internal logging enables the Inertial+ range of products to work stand-alone. Post-mission, data can be output in ASCII text format and loaded in to the software of your choice.

The outputs from the Inertial+ have less delay, or lower latency, than GPS. It is not necessary to wait for the GPS measurement before the data is output. The GPS corrections will still be accepted if they are more than 0.5s late.

The precision ADC in the Inertial+ systems gives more than 20 bits of resolution. The resolution of the acceleration measurements is 0.12mm/s² (12ug). The ADC oversamples the analogue sensors and uses coning/sculling motion compensation algorithms to avoid aliasing of the signals.

The internal processing includes the strapdown algorithms (using a WGS-84 earth model), Kalman filtering and in-flight alignment algorithms. The internal Pentium-class processor runs QNX real-time operating system to ensure that the outputs are always delivered on time.

6-axis Inertial Navigation System
Use Your GPS Receiver
No jumps in position
True Heading
Accurate Measurements
GPS Time Aligned
Shutter Time Capture
&Distance Output
Wheelspeed/Odometer Input
100 Hz or 250 Hz Updates
Low Latency
2 GB Logging
Quick Installation
Compact Size.

Aerial Survey

Inertial+ sensors transform existing GPS receivers into integrated GPS/INS providing real-time georeferencing measurements.


Enhance the accuracy and increase the reliability of GPS systems so they continue to operate during GPS signal black-outs around trees and buildings.

Asset Management

From street furniture to pylons, the Inertial+ provides the information you need to efficiently survey the position of your assets.

GIS data acquisition

Additional measurements like roll/pitch and heading, available in real-time and post-process and an increase in GPS accuracy and reliability.

Land Survey

Our gx/ix algorithms maintain 2 cm RTK accuracy more reliably when operating in difficult urban conditions or around trees.

Road Survey

Link your existing GPS receiver to an Inertial+ to prevent position drop-out under bridges and in tunnels, and increase accuracy in built-up areas.

Mobile Mapping

Additional inertial measurements increase the accuracy and reliability of GPS receivers and make georeferencing easier.

DOWNLOAD Inertial+ Series for Survey
DOWNLOAD Inertial+ User Manual
Receiver type L1/L2 GPS Internal receivers
Positioning RTK SPS
Positioning Accuracy 0.02 m 3.0 m
Velocity Accuracy 0.05 km/h RMS 0.1 km/h RMS
– Bias

10 mm/s²

10 mm/s²
– Linearity


– Scale Factor


– Range

10G (Optional 30G)

10G (Optional 30G)
Roll/Pitch 0.03° 0.05°
Heading 0.1° (single antenna)
0.06° (dual antenna, 4 m baseline)
0.2° (single antenna)
0.06° (dual antenna, 4 m baseline)
Angular Rate    
– Bias 0.01°/s 0.01°/s
– Scale Factor 0.1% 0.1%
– Range 100°/s (Optional 300°/s) 100°/s (Optional 300°/s)
Update Rate 100 Hz (Inertial+/Inertial+2)
250 Hz (Inertial+ 250/Inertial+2 250)
100 Hz (Inertial+/Inertial+2)
250 Hz (Inertial+ 250/Inertial+2 250)
Calculation Latency 3.5 ms 3.5 ms
Power 10–18 V dc, 15 W 10–18 V dc, 15 W
Dimensions (mm) 234 x 120 x 76 234 x 120 x 76
Weight 2.3 kg 2.3 kg
Operating Temperature –10 to 50°C –10 to 50°C
Shock Survival 100G, 11ms 100G, 11ms
Internal Storage 2 GB 2 GB
Operating temperature -10° to 50°C -10° to 50°C
Vibration 0.1 g²/Hz, 5–500 Hz 0.1 g²/Hz, 5–500 Hz
  • Inertial+

  • Inertial+2

  • Inertial+250

  • Inertial+2 250